Rubber Compounding Materials
Vulcanization Materials
Activators


349 items found
Search by for

Tradename
Composition
Supplier ò

Properties

Function & Compounding


Rhenofit 2060
Magnesium oxide in a binder
Rhein Chemie Corporation
ï

Sp.gr. 3.57; light gray powder

Curing activator and acid acceptor particularly suitable for polychloroprene rubber (CR) and adhesives. a low active magnesium oxide especially selected for the use in the rubber processing industry; improves the processing safety of rubber compounds based on CR, CSM, CM and CIIR; raises the critical temperature of basic accelerators and thus prevents scorching; for acid accelerators the activating temperature is decreased; in polymers containing chlorine, especially CR, it serves as an acidacceptor and thus improves the ageing properties of the vulcanizates; in cold cured rubber coated fabrics, it is used to neutralize acid traces; moduli are generally increased by the addition of Rhenofit 2060.


Calcium Hydroxide

Rhein Chemie Corporation
ï

See also FE(Ca(OH)2)-68, and Elast-O-Sperse RS-1


FE(MAG-HA)-55
55% magnesium oxide in Carnauba wax
Rhein Chemie Corporation
ï

Sp.gr. 1.60; free flowing bead.

FE(MAG-HA)-55 dispersion is a protected form of magnesium oxide for general use in fluoroelastomer compounding; will improve dispersion, property consistency, and reduce mixing time.


Calcium Oxide

Rhein Chemie Corporation
ï

See Rhenogran CaO-80, Rhenofit C, Elast-O-Sperse RS-1, FE(Ca(OH)2)-68, FE (CaO)-75 and Elast-O-Cal S-80, Elast-O-Cal 80, Elast-O-Cal 80HT, Elast-O-Cal 80FDA,Elast-O-Cal C-75, Elast-O-Cal 90, Elast-O-Cal (G-50)-90, Elast-O-Cal P-90


PLC(TEA)72
72% triethanloamine on an inert mineral carrier.
Rhein Chemie Corporation
ï

Sp.gr. 1.33; off-white dustless powder form

Powdered liquid concentrates are free flowing dustless powder dispersions of liquid ingredients on an inert mineral carrier.


Zic-Stick '85'
Zinc oxide dispersion
Rhein Chemie Corporation
ï

Sp.gr. 3.66; zinc oxide content approx 90%; very fine dispersion of highly active zinc oxide

Activator for NR and SRs; vulcanizer for polychloroprene and other halogenated elastomers; superior activity coupled with rapid complete incorporation enables 3 parts of Zic Stick 85 to replace 5 parts of zinc oxide powder in most applications.


FE(Ca(OH)2)-68
68% calcium hydroxide in Carnauba wax
Rhein Chemie Corporation
ï

Sp.gr. 1.64; free flowing bead. (see Calcium Hydroxide).

FE(Ca(OH)2)-68 dispersion is a protected form of calcium hydroxide for general use in fluoroelastomer compounding; will improve dispersion, property consistency, and reduce mixing time; for safe handling of calcium hydroxide, FE (Ca(OH)2)-6


Poly-Dispersion GRD-90
90% Red Lead oxide in an ECO binder
Rhein Chemie Corporation
ï

Sp.gr. 5.18; orange slabs

Used as a cure activator in ECO cure systems; the red lead acts as an acid scavenger for the cure system allowing a more rapid cure.


Poly-Dispersion TRD-90
90% red lead oxide in an EPDM/EVA binder
Rhein Chemie Corporation
ï

Sp.gr. 4.58; orange slabs

Preferably used as an activator in acid resistant compounds. It considerably reduces the swelling of vulcanizates in water; is suitable as an oxidizing agent for the vulcanization of butyl rubber with p-quinone dioxime; can be used to improve the heat resistance in peroxide cured CPE compounds; is not recommended for use in thiadiazole cured CPE; filler in compounds for protective covering, because of the high absorption capacity to x-rays.


FE(CaO)-75
75% calcium oxide in Carnauba wax
Rhein Chemie Corporation
ï

Sp.gr. 2.09; free flowing bead. (see Calcium Oxide).

FE(CaO)-75 dispersion is a protected form of calcium oxide for general use in fluoroelastomer compounding; wwill improve dispersion, property consistency, and reduce mixing time; for safe handling of calcium oxide, FE(CaO)-75 should be specified.





Elast-O-Cal C-75
75% CaO dispersion in chlorinated paraffin
Rhein Chemie Corporation
ï

Sp.gr. 2.30; firm paste dispersion in a chlorinated paraffin binder (see calcium oxide)

A specially designed desiccant for CPE and other polymers where peroxide cure systems are utilized; it will not reduce the effectiveness of the peroxide system which does occur with naphthenic based desiccants.


Elast-O-Cal 80FDA
80% Codex grade CaO dispersion in USP grade white
Rhein Chemie Corporation
ï

Sp.gr. 2.25; firm paste dispersion in a mineral oil binder (see calcium oxide)

Similar in function to Elast-O-Cal 80 except Codex grade calcium oxide is used in a binder of USP grade white mineral oil; it is designed for applications involving food and liquid contact such as potable water contacting items andfood handling belting.


Elast-O-Cal 80HT
80% CaO paste dispersion in paraffinic oil binder
Rhein Chemie Corporation
ï

Sp.gr. 2.25; firm paste dispersion in a 580°F flash point binder (see calcium oxide)

Similar to Elast-O-Cal 80 in function except the 580°F binder allows higher temperature curing operations without oil volatilization.


PLC(TAIC)72
72% triallyl isocyanurate 28% inert mineral carrier
Rhein Chemie Corporation
ï

Sp.gr. 1.31; off-white dustless powder form

Powdered liquid concentrates are free flowing dustless powder dispersions of liquid ingredients on an inert mineral carrier.


Elast-O-Cal 80
80% CaO in hydrotreated naphthenic oil binder
Rhein Chemie Corporation
ï

Sp.gr. 2.20; firm paste dispersion in a high flash hydrotreated naphthenic oil binder (see calcium oxide)

An efficient moisture absorber for all commonly used elastomers imparting excellent protection against porosity or blistering in rubber products produced in low-pressure, high-temperature cure systems such as microwave units, LCM, hot air cures or fluidize


Rhenomag P 2
100% very acitve MgO in polymer binder
Rhein Chemie Corporation
ï

Sp.gr. 1.56; white pellets

Curing activator and acid acceptor, particularly suitable for CR and CM.


Elast-O-Cal P-90
90% CaO in DOP
Rhein Chemie Corporation
ï

Sp.gr. 2.70; wetted powder in DOP carrier (see calcium oxide)

An efficient moisture absorber for all commonly used elastomers imparting excellent protection against porosity or blistering in rubber products produced in low-pressure, high-temperature cure systems such as microwave units, LCM, hot air cures or fluidize baths.


Stearic Acid
Stearic acid
H.M. Royal, Inc.
ï

Sp.gr. 0.84; white powder, flakes, slabs; mild fat odor; non-toxic; mp, 126-133°F; iodine No, 0-15; mp and Iodine number both depend on purity (whether single, double or triple-pressed).

For NR, SRs, (except IIR), latexes; activator; plasticizer; softener; gives acid-type activation; improves processing; aids filler and pigment dispersion; add directly.


Elastomag 100
Magnesium oxide
H.M. Royal, Inc.
ï

White powders. sp. gr, 3.2, surface area 100m2/gm, avg, sp gr, 2.5; shipped in 50# multiwall bags and PE pouches; protect from air and moisture.

For halogenated elastomers; vulcanizing and curing; activator, acid acceptor.


Plastomag 170
Elastomag 170 (magnesium oxide) and naphthenic oil
H.M. Royal, Inc.
ï

Sp.gr. 2.45; bead form; oil agglomerated ultrafine particles.

For halogenated elastomers; vulcanizing and curing agent; activator; acid acceptor; pelleted product improves handling conditions.





Go to Page
Prev  9 10 11 12 13 14 15 16 17 18  Next
Show items at a time

Ø Main Menu
Ø Subscribe

Click companies below for more information about Activators

Suppliers listed
on this page

Rhein Chemie Corporation

H.M. Royal, Inc.

     

This page, and all contents, are Copyright (c) 2019 Rubber World Magazine.
This site was created by Rubber World Magazine's Electronic Publishing Division, Akron, Ohio.