Rubber Compounding Materials
Vulcanization Materials
Activators


349 items found
Search by for

Tradename
Composition
Supplier ò

Properties

Function & Compounding


Rhenofit TRIM/S
70% trimethylolpropane trimethacrylate, 30% silica
Rhein Chemie Corporation
ï

Sp.gr. approx. 1.27; white powder, non-dusting, non-staining

Crosslinking activator for the peroxide vulcanization of synthetic rubbers.


Rhenofit EDMA/S
70% ethylene glycol dimethacrylate, 30% silica
Rhein Chemie Corporation
ï

Sp.gr. approx. 1.25; white powder, non-dusting, non-staining

Crosslinking activator for the peroxide vulcanization of synthetic rubbers.


PLC(SR517)-72
72% SR517
Rhein Chemie Corporation
ï

Sp.gr. 1.26; free flowing dust suppressed powder on an inert carrier.

PLC(SR517)-72 is a replacement for other SR517 liquids sould be evaluated as a direct replacement on an active ingredient basis; the improved handling and reduced waste can reduce raw material requirements


Rhenofit 1987
Combination of activating substances based on urea
Rhein Chemie Corporation
ï

Sp.gr. approx. 1.5; white powder.

Curing activator and promoter for reinforcing fillers


Rhenofit 1600
Combination of urea derivatives and dispersing agent
Rhein Chemie Corporation
ï

Sp.gr. approx. 1.25; light-colored aqueous paste

Blow promoter and deodorizer as well as vulcanization activator with built-in scorch retarder.


Poly-Dispersion T(HRL)D-90
Fine particle size litharge in an EPDM binder
Rhein Chemie Corporation
ï

Sp.gr. 4.75; litharge 90%; very fine dispersion in elastomeric slab form, scored, dusted, and separated with PE.

chlorosulfonated polyethylene stabilizer, add in first step in mixing cycle; provides processing and handling safety, excellent dispersion, uniform cures.


Poly-Dispersion ERD-90
Red Lead in an EPR binder
Rhein Chemie Corporation
ï

Sp.gr. 4.57; Red Lead, 90%; very fine dispersion in elastomeric slab form, scored, dusted and separated with PE.

To produce low water absorption polychloroprene compounds and EPDM wire; provides processing and handling safety, excellent dispersion, uniform cures curing activator for CR, IIR, CSM.


Elast-O-Cal 90
90% calcium oxide in oil binder
Rhein Chemie Corporation
ï

Sp.gr. 2.73; off-white wetted powder

An efficient moisture absorber for all commonly used elastomers imparting excellent protection against porosity or blistering in rubber products produced in low-pressure, high-temperature cure systems such as microwave units, LCM, hot air cures or fluidized bed units.


Magnesium Oxide (MgO)

Rhein Chemie Corporation
ï

See also Mag-Paste, Mag-Beads, Rhenofit 2060, Rhenofit 2120, Rhenofit 2150, Rhenofit D/A, Rhenogran G-1, Rhenofit G-3, Rhenogran MgO-75, Scorchguard O


Mag-Beads
Magnesium oxide beads
Rhein Chemie Corporation
ï

Sp.gr. 1.76; odorless, tan, free-flowing beads in high flash organic binder.

For CR, CSM, PE, NBR, polysulfides; activator, acid acceptor and vulcanizing agent; this dispersion in bead form resists hydration, handles easily and incorporates rapidly.





Rhenofit CF
Specially treated very fine Ca(OH)2
Rhein Chemie Corporation
ï

Sp.gr. approx. 2.2 white powder

Crosslinking activator for fluoro-elastomers.


Rhenomag G 3
75% very acitve MgO in polymer binder
Rhein Chemie Corporation
ï

Sp.gr. 1.56; white pellets

Curing activator and acid acceptor, particularly suitable for CR and CM.


Poly-Dispersion JZFD-90P
88% zinc oxide in a NR binder
Rhein Chemie Corporation
ï

Sp.gr. 3.50; white pellets

Vulcanizing activator for use in natural and synthetic rubber compounds.


Rhenofit 2642
Combination of activating substances based on urea bound to high activity silica
Rhein Chemie Corporation
ï

Sp.gr.. approx. 1.50; white powder, slightly hygroscopic

Accelerator activator for the vulcanization of CO and ECO.


Rhenofit D/A
Highly reactive magnesium oxide
Rhein Chemie Corporation
ï

Sp.gr. 3.60; white powder

A highly reactive magnesium oxide intended specifically for use in the rubber processing industry; improves the processing safety of CR, CSM, CM and CIIR based rubber compounds by increasing the critical temperature of basic accelerators; reduces the susceptibility of rubber compounds to scorching; In acid accelerators, it lowers the necessary activation temperature; in polymers containing halogen, and particularly in CR, it acts as an acid acceptor, thereby improving aging properties; in cold-cured fabric proofing, it serves to neutralize traces of acid; moduli are generally increased by Rhenofit D/A.


Zic-Stick 'SG'
90% zinc oxide
Rhein Chemie Corporation
ï

Sp. gr. approx. 3.66; very fine particle size

Activator for NR's and SR's, vulcanizer for polychloroprene and other halogenated elastomers, superior activity.


Rhenofit TAC/S
70% triallyl cyanurate 30% silica
Rhein Chemie Corporation
ï

Sp.gr. 1.25; fine white crumbles

Cross-linking activator for peroxide vulcanization; technical molded and extruded articles based on EPDM, EPM, CM and others, e.g., profiles, seals, cable coverings and bushings.


Rhenogran MgO-75
75% magnesium oxide with dispersion aids and polymeric binder
Rhein Chemie Corporation
ï

Sp.gr. 2.00; white to gray pellets

Curing activator and acid acceptor particularly suitable for polychloroprene rubber (CR) and adhesives


Rhenogran HPCA-70
60% methyl-2-mercaptobenzimidazol and 1,8 diazabicyclo-5,4,0 undec-7-en, in a polymer binder
Rhein Chemie Corporation
ï

Sp.gr. 1.1; off white granules

Can replace MgO in polychloroprene compounds; excellent heat aging properties can be achieved; replacement of MgO in blends with HIIR compounds is possible.


Rhenofit 2120
Active magnesium oxide
Rhein Chemie Corporation
ï

Sp.gr. 3.57; white powder

An active magnesium oxide especially selected for the use in the rubber processing industry; improves the processing safety of rubber compounds based on CR, CSM, CM and CIIR; raises the critical temperature of basic accelerators and thus prevents scorching; In acid accelerators, the activiting temperature of acid accelerators is decreased; in polymers containing chlorine, especially CR, it serves as an acid acceptor and thus improves the aging properties of the vulcanizates; in cold cured rubber coated fabrics, Rhenofit 2120 is used to neutralize acid traces; moduli are generally increased by its addition.





Go to Page
Prev  9 10 11 12 13 14 15 16 17 18  Next
Show items at a time

Ø Main Menu
Ø Subscribe

Click companies below for more information about Activators

Suppliers listed
on this page

Rhein Chemie Corporation

     

This page, and all contents, are Copyright (c) 2019 Rubber World Magazine.
This site was created by Rubber World Magazine's Electronic Publishing Division, Akron, Ohio.